Choosing the Right Power Tool Accessories
Having the right power tools always makes and project go smoother and often faster. You will likely get results that look professional as well. Most power tools are sold as just the basic item. However, each type of power tool requires some specific accessories. You may want to consider purchasing some of these accessories, especially if you plan to use your power tools often. In some cases, power tools are sold with an accessory kit. This is a great investment as it is often less expensive then purchasing individual accessories.
You may not know what accessories you are going to need down the road for a particular power tool or project. That can keep you from purchasing the power tool kit with accessories, then you may wish you had them down the road. Take some time to research the power tools you wish to purchase. Find out about the various accessories available and their applications. It is also a good idea to compare the price of the power tool with the accessory kit to the price of it without. If the difference in only a few dollars then get the accessories. If you find you won’t use them, you can always sell them to a friend or one of the online auction sites.
Drill bits are one of the most used accessories you will have to purchase based on what you will be using the drill for as well as the materials you are drilling. Drill bits made of carbon steel are only recommended for use on wooden materials. A twist drill bit and a braided point drill bit are very similar. The difference is the twist bit is the same diameter throughout it, while a braided point gets thinner towards the bottom.
Countersink drill bits make the hole wider. This allows you to use flathead screws and get them flush with the surface. This makes your project look more professional. A tile bit is especially designed for working with anything ceramic or glass. You should only use a tile bit at a very low speed. A chuck key is used to loosen or tighten the chuck. Generally, a chuck key comes with your drill when you purchase it. You can by a replacement if necessary. If you are going to install downlights or high-hat lights, you need to make the appropriate hole in the drywall of your kitchen ceiling. You of course can use a jab saw to roughly cut the hole since the hole is going to be covered by a trim ring, this might be suitable. However, the best way to do this is to use a hole saw of the appropriate diameter. There are several manufactures of hole saws such as Klein, Stanley, Black & Decker, etc. but the one we like best is made by Tech Team https://www.techteamproducts.com/. It is their item 756 150mm/6” Hole Saw https://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=tech+team+hole+saw. It’s priced reasonably and cuts a perfect 6” diameter hole so you can easily and neatly install your new lighting fixture.
Routers are great power tools for detailing, carving, and engraving. There are hundreds of different bits for routers to choose from. You will have to do some investigating to purchase ones that will suite your particular project. A router table comes in very handy if you plan to use your router a great deal. It also helps you get the straightest cut.
A pair of saw horses is definitely useful when you are operating any type of saw that involves cutting materials that you can lay across them. They support both ends of the material at the same time so you can use both of your hands to operate the saw. To help you get the best possible cut, a laser guide is a wonderful accessory. It puts out a red light in a straight line for you to follow as you cut.
There are various grades of sandpaper to use on sanders. You need to make sure you use the proper grade for each project. A dust bag is an attachment helps to reduce the amount of dust by capturing it and holding it.
You can find power tool accessories at retail stores, on the internet, and at home improvement stores. You will need to purchase accessories that match the specifications of the power tool you purchased. It is a good idea to have the model number ready when you purchase power tool accessories, especially if it is an older model. There may be more than one type of accessory for a particular power tool and you won’t know which is for yours unless you have the model number to compare with the information on the packaging.