8” x 8” Granite Countertop Bracket, 2 Pieces #00781

Hardware

Showing all 14 results

  • 8” x 8” Granite Countertop Bracket, 2 Pieces #00781

    0 out of 5
    The Tech Team 8” x 8” Granite Countertop Bracket is

    The Tech Team 8” x 8” Granite Countertop Bracket is made from heavy-duty steel with a smooth, durable powder coat finish.  The bracket set is perfect for invisibly supporting an overhanging counter for a clean, elegant look in a kitchen.  The set includes two (2) brackets.

    Countertops made from granite, concrete, slate, or marble are all the rage. However, installing them can be a little bit dicey because of their weight. For example, a 30” x 96” slab can weigh as much as 600 lbs. Clearly you can find enough strong people to move the countertop around and install it, the major challenge is making sure that the fixtures and the bases holding the countertop in place are strong enough to support the weight. This particularly becomes problematic if you are making a kitchen island with an overhang. For this you need to properly support the underside of the overhang. Tech Team’s 8” x 8” countertop brackets are the perfect solution. These are stronger than any other brackets available on the market. They are 8” x 8” to give you a full 8” of vertical purchase as opposed to all the other brackets on the market that are 8” x 6” and only give you 6” of vertical purchase. In addition, they are full 12mm/ ½” thick as opposed to everything else on the market that is only 10mm / 3/8” thick. When you are installing a heavy counter top, you want to have something that is going to be strong enough to support the weight but also strong enough to support the extended edge that is cantilevered beyond the top of the cabinet base. Depending on exactly the material used for your countertop, you would want to put one brace at every 2 ft. or less depending on how the symmetry and the spacing works out.

    The weight capacity of the bracket is in direct proportion to its mounting.  The individual bracket can easily support 150 lbs.  However, it must be mounted to a wood support member that can support at least the same weight.  We have not included mounting screws as the length of the screw required will be dependent upon the wood member the bracket is anchored to. Intended for use as a counter top support bracket for counter tops supported by an adequate number of uniformly spaced brackets

  • 8” x 8” Granite Countertop Bracket, 4 Pieces #00732

    0 out of 5
    The Tech Team 8” x 8” Granite Countertop Bracket is

    The Tech Team 8” x 8” Granite Countertop Bracket is made from heavy-duty steel with a smooth, durable powder coat finish.  The bracket set is perfect for invisibly supporting an overhanging counter for a clean, elegant look in a kitchen.  Set includes four (4) brackets.

    Countertops made from granite, concrete, slate, or marble are all the rage. However, installing them can be a little bit dicey because of their weight. For example, a 30” x 96” slab can weigh as much as 600 lbs. Clearly you can find enough strong people to move the countertop around and install it, the major challenge is making sure that the fixtures and the bases holding the countertop in place are strong enough to support the weight. This particularly becomes problematic if you are making a kitchen island with an overhang. For this you need to properly support the underside of the overhang. Tech Team’s 8” x 8” countertop brackets are the perfect solution. These are stronger than any other brackets available on the market. They are 8” x 8” to give you a full 8” of vertical purchase as opposed to all the other brackets on the market that are 8” x 6” and only give you 6” of vertical purchase. In addition, they are full 12mm/ ½” thick as opposed to everything else on the market that is only 10mm / 3/8” thick. When you are installing a heavy counter top, you want to have something that is going to be strong enough to support the weight but also strong enough to support the extended edge that is cantilevered beyond the top of the cabinet base. Depending on exactly the material used for your countertop, you would want to put one brace at every 2 ft. or less depending on how the symmetry and the spacing works out.

    The weight capacity of the bracket is in direct proportion to its mounting.  The individual bracket can easily support 150 lbs.  However, it must be mounted to a wood support member that can support at least the same weight.  We have not included mounting screws as the length of the screw required will be dependent upon the wood member the bracket is anchored to. Intended for use as a counter top support bracket for counter tops supported by an adequate number of uniformly spaced brackets.

  • Floating Shelf Bracket, 3 Prong, 18-Inch, Heavy Steel Construction, Powder Coat Finish #730

    0 out of 5
    The Tech Team Floating Shelf Bracket is made of heavy-duty

    The Tech Team Floating Shelf Bracket is made of heavy-duty steel with a smooth powder coat finish.  The floating shelf bracket is perfect for invisibly supporting shelves for a clean, elegant look in a kitchen or bathroom.

    The load bearing capacity of this bracket is in direct proportion to the wall member it’s mounted to and the manner of mounting. The outer most sets of holes are 16”on center so that the bracket can be directly mounted to standard spaced wall studs. It is important to use screws of adequate diameter and length to ensure that the bracket is properly anchored. If drywall anchors or toggles are used, the load bearing capacity of the shelf will be greatly diminished.

  • Floating Shelf Bracket, 32 Inch, Heavy-Duty Steel, Powder Coat Finish #729

    0 out of 5
    The Tech Team Floating Shelf Bracket is made of heavy-duty

    The Tech Team Floating Shelf Bracket is made of heavy-duty steel with a smooth powder coat finish.  The floating shelf bracket is perfect for invisibly supporting shelves for a clean, elegant look in a kitchen or bathroom.

    The load supporting capacity is in direct proportion to the method of mounting and the structural units the shelf is mounted to. In other words, if you are mounting the unit to drywall with screw anchors, the load capacity will be severely diminished. On the other hand, if you are mounting directly to studs using #14 x 3” screws mounted into stable structurally sound studs, shelfs up to 10” deep will easily support up to 100lbs.

  • Floating Shelf Mounting Bracket, 6 inch, 2 Pack #00731

    0 out of 5
    The Tech Team Floating Shelf Bracket set is made of

    The Tech Team Floating Shelf Bracket set is made of heavy-duty steel with a smooth powder coat finish.  The floating shelf bracket is perfect for invisibly supporting shelves for a clean, elegant look in a kitchen or bathroom.  The set includes two (2) brackets.

    The load bearing capacity of this bracket is in direct proportion to the wall member it’s mounted toand the manner of mounting. The bracket should be directly mounted to wall studs. It is important touse screws of adequate diameter and length to ensure that the bracket is properly anchored. If drywall anchors or toggles are used, the load bearing capacity of the shelf will be greatly diminished.

  • Professional Grade Maximum Strength Picture and Mirror Hanging Kit, 100 lb. Capacity, 21 Pieces #00736

    0 out of 5
    Once installed, French cleats maintain their level alignment, unlike many

    Once installed, French cleats maintain their level alignment, unlike many other wall-hanging methods.  The Tech Team Professional Grade Picture and Mirror Hanging Kit contains one set of 12” cleats and the necessary hardware to mount four pictures, mirrors, or other wall decorations.  Included D ring cable eyes allow for support of the bottom of a decoration, to prevent heavy pieces from distorting and to prevent picture frames from pulling apart.

    Although this kit includes screw anchors, in order to reach the top of this kit’s weight capacity, the cleats should be screwed into a stud.  We recommend a stud finder for the most accurate results

  • Professional Grade Maximum Strength Picture and Mirror Hanging Kit, 20-Inch French Cleats, 150 lb. Capacity, 21 Pieces #00737

    0 out of 5
    Once installed, French cleats maintain their level alignment, unlike many

    Once installed, French cleats maintain their level alignment, unlike many other wall-hanging methods.  The Tech Team Professional Grade Picture and Mirror Hanging Kit contains one set of 20” cleats and the necessary hardware to mount four pictures, mirrors, or other wall decorations.  Included D ring cable eyes allow for support of the bottom of a decoration, to prevent heavy pieces from distorting and to prevent picture frames from pulling apart.

    Although this kit includes screw anchors, in order to reach the top of this kit’s weight capacity, the cleats should be screwed into a stud.  We recommend a stud finder for the most accurate results.

  • Professional Grade Picture and Mirror Hanging Kit, 25-200 lb. Capacity, 36 Pieces #00735

    0 out of 5
    Once installed, French cleats maintain their level alignment, unlike many

    Once installed, French cleats maintain their level alignment, unlike many other wall-hanging methods.  The Tech Team Professional Grade Picture and Mirror Hanging Kit contains four sets of cleats and the necessary hardware to mount a picture, mirror, or other wall decoration.  Included D ring cable eyes allow for support of the bottom of a decoration, to prevent heavy pieces from distorting and to prevent picture frames from pulling apart.

    Although this kit includes screw anchors, in order to reach the top of this kit’s weight capacity, the cleats should be screwed into a stud.  We recommend a stud finder for the most accurate results.

  • Spring Loaded Latch Bolt, 2 Pieces #00747

    0 out of 5
    The Tech Team Spring Loaded Latch Bolt uses a heavy-duty

    The Tech Team Spring Loaded Latch Bolt uses a heavy-duty barrel bolt to securely keep gates and doors closed.  The bolt is spring loaded to keep closed and can be locked in the open position for convenience.  The latch is made of solid steel with a durable zinc finish to resist the elements.  Color-matched hardware is included.

  • 12 Inch Hose Clamp, 4 Pieces #00726

    0 out of 5
    Product Description 12” key tensioner-style stainless steel band for12-inch dust collection

    Product Description

    12” key tensioner-style stainless steel band for12-inch dust collection hoses and 12” inch dust vent hoses. #2 Phillips head or 5/16” drive screw mechanism ensures a good repair with a tight fit. 9/16” inch wide stainless-steel band fits hose diameters from 5 ¼ inch diameter up to 8 inches. Pack of 4.

  • 4″ Dryer Vent Hose Clamps #703

    0 out of 5
    Product Description 4” key tensioner-style stainless steel band for 4-inch dust

    Product Description

    4” key tensioner-style stainless steel band for 4-inch dust collection hoses and 4” inch dust vent hoses. Oversize key-style turn closure for installation without tools ensures a good repair with a tight fit. ½” inch wide stainless-steel band fits hose diameters from 2 inches to 4 ½ inches. Pack of 6.

  • 6 Inch Hose Clamp, 4 Pieces #00723

    0 out of 5
    Product Description 6” key tensioner-style stainless steel band for6-inch dust collection

    Product Description

    6” key tensioner-style stainless steel band for6-inch dust collection hoses and 6” inch dust vent hoses. #2 Phillips head or 5/16” drive screw mechanism ensures a good repair with a tight fit. 9/16” inch wide stainless-steel band fits hose diameters from 5 ¼ inch diameter up to 8 inches. Pack of 4.

  • Hose Clamp Set #00727

    0 out of 5
    Product Description 3” key tensioner-style stainless steel band for3-inch hoses and.

    Product Description

    3” key tensioner-style stainless steel band for3-inch hoses and. Oversize key-style turn closure for installation without tools ensures a good repair with a tight fit. ½” inch wide stainless-steel band fits hose diameters from 3 inches to 3 5.8 inches. Pack of 8.

  • Barn Door Floor Guide #724

    0 out of 5
    Product Details The Tech Team Barn Door Floor Guide is made

    Product Details

    The Tech Team Barn Door Floor Guide is made of heavy-duty steel with a durable powder coated finish.  An adjustable ball bearing roller allows the guide to fit almost any common door thickness and allow the door to slide smoothly and quietly.  Screws and anchors for mounting are included.  Also included is a hex key for adjusting the roller.